top of page
TOTAL COAT AUTO
BODY EXTREME® – Bedliner Low Grip
.jpg)
MEDIUM TEXTURE WITH MAXIMUM PROTECTION
ANTICORROSIVE, ANTI-GRAVEL AND NOISE-REDUCING POLYMER COATING - WATER-BASED
BODY EXTREME® – Bedliner Low Grip
Our Low Grip Bedliner is a water-based polymer coating that is anti-corrosive, anti-gravel, anti-skid, and noise-reducing; specially formulated for pickup truck beds to provide maximum resistance to mechanical damage. The combination of special polymers and solid fillers provides the optimal balance between hardness and elasticity, allowing it to withstand extreme shear stress.
Chemical Base
Water-based polymer.
Consistency
Viscous, with high thixotropy, does not drip
At 5 RPM (24.000-40.000); at 50 RPM (4000 - 10.400)
Viscous, with high thixotropy, does not drip
Thixotropy
5 or more
Shore A hardness
95 – 98
Density (25 °C)
1.37 – 1.47 gr/ml
Gravelometer – 20 mils wet thickness – (SAE-J400 5 pint @ 70psi, 45°)
Pass (10)
Taber abrasion resistance ASTM D-4060 (mg of loss/1000 cycles, CS-17 wheel)
132
Weather resistance / UV rays - ASTM G154 (2,000 hours)
WITHOUT loss of integrity
Slip resistance test for floors (ANSI A137.1/A326.3)
0.65 DCOF (Excellent – Very high traction)
Resistance to commonly used chemicals (GOOD)
Weak acids, weak alkalis, oils, and cleaning agents.
Salt spray chamber ASTM-D117, at 20 - 40 mils wet thickness: 1000 hours
Pass
Initial Adhesion ASTM-D3359
Pass
Abrasion resistance (Taber test) mg /1000 cycles ASTM D4060
30 to 50
Application temperature
5 - 35 °C
Drying time (depending on thickness)
60 minutes
Finish
Semi-gloss textured.
Colors
Black, white, gray, yellow.
Shelf life
12 months from the date of manufacture
bottom of page